Comments

Comments:
Name:
Email:
City/State:

Enter The code Above:

On 07/07/2008 Mike Daniels from Suwanee, Georgia 30024 wrote:
is the only difference between the MC210 and the MC2F the stand up feature of the MC2F?? -- The length and widths of the trailers differ, also.
On 07/07/2008 Mike Scialabba from New Castle PA wrote:
My name is Mike from the EaCo Chem company. I'm the Technical Services Manager. EaCo Chem is the manufacturer of the Sabre product, used for deoxidizing aluminum in the fleet wash industry. --Thank you for recommending the Sabre product. W... [Click here for complete comment.]
On 07/06/2008 Frank Bearsch from Bloomington, IN wrote:
Price on TK 1 trailer? -- $2757
On 07/05/2008 BILL from Spanish fork , utah wrote:
Can I order some more lug nuts and the center hub cap for the alum. wheels. -- Yes, you can order these through any aluma dealer. Go under the "dealer" section of the website to find the closest dealer.
On 07/04/2008 Greg from Dillsboro,In wrote:
Is there a way to get prices,and quote. Is there a spray-in liner avalible. Thank you for your time. -- Let me know what trailer your interested in and we can supply you with a quote. We don't offer any spray-in liner at this time for any of our trailers.
On 07/03/2008 bruce roberts from Eau Claire, Wi. wrote:
I just got a a8816 use atv trailer--the questions i have is what size bearing buddies does it take and how much to get 1 extra ramp to use for the tail section of trailer--I think its 12 x 70 thank you -- The A8816 comes with 2-2200 lb Dexter E-Z Lube hubs. You can go to dexteraxle.com to find out more on the maintanence of the axles. MSRP for the back ramp-$123. Thanks for buying Aluma!
On 07/03/2008 Richard Koning from Frankfort, IL wrote:
I have a 7814 on order at Funk Trailer sales. He states it takes a 2 5/16 ball but your spec page lists it as a 2" ball, which is correct? -- 2" is standard on the 7814 trailer. Hope you enjoy your trailer!
On 07/03/2008 Dave Vincent from Ayr, Ontario Canada wrote:
Are you interested in a Southern Ontario Dealer? Dave Vincent Team Vincent Motorsports Inc -- I'll have our territory manager get in touch with you. Thanks for your interest in Aluma!
On 07/02/2008 Mark from Burlington, IA wrote:
I own one of your MC210 trailers and love it so much that I just purchased a MCtxl to pull behind my road king. I am wondering about what is available in a spare tire and mount for it. Where does it mount? How much does it run? Is it a mag wheel to match? -- Thanks for being such a great customer! Let us know how you like the MCTXL and if you have any suggestions on improvements on either trailer. The tire mounts on the tongue of the trailer and MSRP for the mount and a matching wheel/tire is $274.
On 07/01/2008 Brent from Kalaheo, HI wrote:
I have an enclosed trailer and love it. I need a replacement roof vent. Please advise. Aloha -- Please get ahold of our dealer in Kauai-phone # 808-823-0556. Thanks for buying Aluma!
On 06/30/2008 dave from wilmington Delaware wrote:
wow I am very very impressed with the comments here and I have been to dealers in the delaware area very nice product . I am looking forward to selling what I have and getting a Mc210 or Mc1F will both these be good for a dresser 800 pounds ? would you ge... [Click here for complete comment.]
On 06/30/2008 Bob Fields from Sarasota, FL wrote:
I have an MCT. I want to put my kayak on time of it. I can easily mount a kayak saddle on the rear railing of the lid, but I don't have any ideas for mounting one at the front of the trailer to rest the kayak on. Any ideas? -- You could add a aluminum piece to the front to mount to.
On 06/30/2008 Bob Fields from Sarasota, FL wrote:
I purchased an MCT that I pull behind my Honda VTX motorcycle. What is the recommended air pressure for the tires on this trailer? -- 35-40 lbs-the more weight in the trailer the less pressure.
On 06/30/2008 Gary Bell from Santa Fe, Texas wrote:
I just purchased and MC210 motorcycel trailer. I'm looking for the spare tire mount that is made for that trailer. Alos I might need some addtional tie downs (the kind that need to be heli arched to the frame. I would appreciate some feedback on these iss... [Click here for complete comment.]
On 06/29/2008 John Entrikin from Corcoran, MN wrote:
I just bought a 2009 MCT with the six spoke alum. wheels and would like to know the recommended lug nut torque and tire pressure. -- Tire pressure 35-40 lbs. The torque process is a 3 stage process-always tighten in a "star" pattern. Tighten 1-then go across to the next & ect. until all are tight in this "star" manner. 1st-20-25lbs 2nd-50-60lbs 3rd-95-100 lbs 95-10... [Click here for complete comment.]
On 06/28/2008 Guy Chinn from Colorado Springs, CO wrote:
What would a spare tire & wheel option cost to fit the 548LW? -- $201-13" aluminum tire and wheel
On 06/27/2008 Martin Francois from Lafayette, La. wrote:
I'm interested in your MC 210 trailer. I have an 08 Goldwing and a Valkyrie. These bikes have the flathead six cylinder motors and are quite wide. Will te MC 210 be able to accomidate these bikes side to side or would I have to stagger them? Also, can... [Click here for complete comment.]
On 06/26/2008 Craig Malone from Dow City, IA wrote:
I just bought the 638LW, this is the best trailer by far out of all that I have looked out, and the price is unbeatable. -- Thanks for buying Aluma and for the great comments!
On 06/26/2008 Randell Hill from Birmingham Alabama wrote:
Price on your MC10 trailer please. Thanks. -- $2006
On 06/26/2008 Jim Greco from palm Harbor Fl wrote:
What is the distance from where the bike front wheel rests to the ball on the neck on the Model MC-10 -- 48" to 50"
On 06/26/2008 joe barber from Plaquemine LA wrote:
I have been looking at the WAGS motorcycle pet trailers. Can/do you make a pet trailer? If so do you have any pictures? If not can you and how much do you think it would cost? -- We don't have a pet trailer in our lineup of trailers. If you have any information on WAGS or some popular sizes/options on the pet trailer let us know for future new product development.
On 06/26/2008 J im greco from palm Harbor Fl wrote:
I would like a price on an MC-10 Also is it available w or wo the air dam is so , price difference please -- $2006 Comes standard with the front rockgaurd.
On 06/25/2008 Brian Fritz from Marshalltown, IA wrote:
Is there any major difference b/w the 7800 & 8200 models beside width? Structurally the same? What are the prices for your 14' & 16' is those models? Thanks. -- The 82 has a stronger bed and frame. 7814-$4962 7816-$5152 8214-$5521 8216-$5847
On 06/24/2008 Bob Johnson from Waukesha Wis wrote:
I would like to know the price of models 548LW & 638LW trailers. I would also like the prices of side racks and is there and upgrade to get 14" tires for them with the aluminum wheels -- $1513-548LW $1640-638LW side rack set-$320 and $339 We have the 14" upgrade for $99
On 06/24/2008 scott sellers wrote:
i would like a msp on you motorcycle cargo trailers thank you -- AE610-$5917 AE612-$6501
On 06/24/2008 Tom Shoup from Southampton,ma wrote:
I am considering your model 548LW trailer. I was wondering if you have a drawing or picture of the trailer with the sides and front attached? Thank you in advance. Tom -- Go to the "products" section of website under "flatbed trailers" and you'll see some side racks on a 486 and 6810. That same setup will work for the 548LW.
On 06/24/2008 Dennis Van Der Linden from lakefield MN wrote:
I am looking at the 7712h trailer and would like a brouchure on it if all possible. -- Let me know where to send. Thanks
On 06/22/2008 Robert Bauer from Lyndora Pa. 16045 wrote:
On 6/21/08 I purchased a 548 utility trailer with sides and a folding ramp gate. On my way home I noticed that the back end of the side rails moved back and forth. When I arrived home I checked to see if they were to be secured in some way to the rear gat... [Click here for complete comment.]
On 06/22/2008 Kevin Nordmann wrote:
Looking for enclosed 6x14 v nosed trailer with rear ramp door single axle wondering how much and where to get one for 56373 -- $7813-MSRP Go to the "dealer" section of the website to find the closest dealer.
On 06/21/2008 Eric J Peterson from Willmar, MN wrote:
I just purchased a new aluma trailer and ordered a spare tire carrier per your part book and the dealer sent me an off brand fulton spare tire carrier, I dont think it is right and I would rather have one of the ones you have pictured, where can I pick on... [Click here for complete comment.]
On 06/21/2008 Paul Fusco from Spring Grove, PA wrote:
Prices of your A2123, 7710H, and 7712H. Thanks. -- A2123-$2636 7710H-$2642 7712H-$2866
On 06/21/2008 Barry Carr from Georgetown, Ontario wrote:
I am very interested in purchasing a MC1F trailer. The specifications in your sales brochure note the tire capacity for that trailer using 13" wheels is 1360#. Am I correct in assuming that this is the total capacity for both tires together and that the m... [Click here for complete comment.]
On 06/20/2008 Scot Haig from Mesa, Arizona wrote:
I would like to know if the Autohome OverZone or OverLand rooftop tents can be placed on top of the AE46 and will the lid support the weight of people on top like it can on auto rooftops? The auto rooftop tent product can be found at http://www.autohomeu... [Click here for complete comment.]
On 06/20/2008 Bill Whitright from Deopiflircatur, IN wrote:
can you explain the suspension on your motorcycle trailers? do the trailers bounce ect? -- All of our trailers come with dexter rubber torsion axles which allows the trailer to give with the road. Spring axles on the other hand don't give thus allowing the trailer to bounce.
On 06/19/2008 Stan Kirby from Oskaloosa, Iowa wrote:
I am looking for an ALUMA 7210 trailer.I just missed a 2007 hold over unit today and this is the perfect size for my use. Do you have one anywhere for sale? What would be the price? -- MSRP-$2017 To find a dealer go to "dealer" tab on the website.
On 06/19/2008 b. Weyde from Mchenry,ILL wrote:
Ineed pricing on model 1020 -- $6558
On 06/19/2008 Joe C. from woodville, wi wrote:
Used a few times now. The 8113 is a great all-in-one trailer. Are their any other options? How hard would it be to get the electric brake upgrade and at what cost. Also the side where the ramp is, is their something that can be put in place their te... [Click here for complete comment.]
On 06/18/2008 David from Denver wrote:
I am selling my trailer to get a bigger Aluma. Is the warranty transferred to the new owner? -- Yes
On 06/18/2008 Kelly from SE Louisiana wrote:
Hi, could you email me a wiring diagram for the MCTXL? Thanks. -- Will do.
On 06/17/2008 Wilson from Winnipeg wrote:
I see you posted the list price as $1824, yet the dealer here claims that the list price is over $400 more. He claims that Aluma charges him more than $1824 for the trailer. What is with the pricing and this dealer in Steinbach, Manitoba, Canada... [Click here for complete comment.]
On 06/17/2008 Dennis Dolliver from Norfolk, NE wrote:
I need the wiring diagram for the 5 pin trailer connector for a 2008 MCT Trailer. Please email it to me ASAP. I need to wire up the bike to pick up the trailer. -- Will do.
On 06/17/2008 Todd Bauernfeind from WA wrote:
Please, new pricing on model A315 ATV 8113 Utility Also, do you have info on the unique suspension you use? Thank you -- $3385 for A315 $3728 for 8113 We use a dexter axle with a rubber torsion axle.
On 06/17/2008 Roger from Spirit Lkake wrote:
I'm lookingat a AE610M and would like to know the overall width, height, length. The interior width, height, length. Floor height. Rear door width and height. -- Overall width 93", length 173" height 91". Interior width 69 1/2", length 119", height 72". Rear door opening 67 1/2"
On 06/17/2008 Wilson from Winnipeg/MB wrote:
I am looking at the 6310LW and want to know: Capacity overall width overall length hitch height MSRP Thank you! -- 1600 LBS -weight evenly distibuted Overall width=84 1/2" Overall length= 170" Bed height=13.5" MSRP-$1824
On 06/17/2008 Paul Fusco from Spring Grove, PA wrote:
I have the A2123. How much weight will the racks on the A2123 hold? Do you have any alternatives for loading a 1200# motorcycle that will work on the A2123? Cost? Suggestions? Thanks. -- I will have our engineer get in touch with you.
On 06/16/2008 Randy from Lake Charles, La wrote:
The left fender fell off of my mc10 today as I was driving. Its a 2005 model. Looks like a clean break at all three welds. I am guessing one after the other cracked then it fell off. We drove over 600 miles today. It was still on at about the 450 mile... [Click here for complete comment.]
On 06/16/2008 Tom Larsen from Dayton, MD wrote:
I am looking for a 6810-7210H that I can use for both utility hauling or to haul two motorcycles (I intend to attach two motorcycle stands to the deck when hauling a motorcycle). I have been unable to find a dealer in the MD area that has that model. Wo... [Click here for complete comment.]
On 06/15/2008 Ed McDill from Garden Grove, CA wrote:
Do you have any dealers in southern California? Thanks, Ed -- If you go under the "dealer" tab of the website you'll find some.
On 06/15/2008 Paul Fusco from Spring Grove, PA wrote:
I just bought your A2123 and need a back gate for it. I am interested in your MC10 tail gate ramp. When not using it, does it slide into the tail like the side gates do on my trailer? What is the price? I will be hauling a combination of things at differe... [Click here for complete comment.]
On 06/15/2008 Dave Prestidge from Grand Rapids Mn. wrote:
I would like prices on these two trailer... A8812 A8816 Thank you! -- $3099 $3687
On 06/14/2008 Williams from Memphis, TN wrote:
What is the recommended tire pressure for an Aluma MC210 with two full size Harleys in tow? -- About 45lbs
On 06/14/2008 Ron Resch from Wexford Pa. wrote:
I am very interested in your A8816.Itis just what I am looking for with the exception of two things.Is it possible to get the bed 96 inches wide instead of 88 inches and is it possible to get electric brakes. thanks Ron -- We just came with a new model trailer called 9918-99"x18'-2-2200# axles with electric brakes-or we can build it 16' if you like. This trailer has a tailgate instead of the side ramps.
On 06/14/2008 Dan Long from Kamloops,BC,Canada wrote:
I am interested in becoming a dealer, Could you send me some information -- Where are you located?
On 06/12/2008 Vince Cal from Wilmington, NC wrote:
I just received a side mount spare tire rack for a 64133 purchased from Rock Springs Hdw, and drop shiped to Wilmington NC. The item was shiped without mounting instructions and I don't have a clue as to how this thing mounts. Can you please e-mail inst... [Click here for complete comment.]
On 06/12/2008 Todd from Davenport/Iowa wrote:
I am in the market for a 6X10 enclosed with a V Nose..What should a trailer like that run me and can I buy direct or do I have to go through a dealer. Thank you. -- $4958-you'll have to buy it through a dealer.
On 06/12/2008 Phil from Pittsburgh PA wrote:
What is the price of the MC1F and what does it come with in standard? Stone guard? Wheel chock? Spare wheel? Also: How many tie down hooks? How wide is the loading ramp? Thanks -- $2520 comes standard with stone gaurd and wheel chock. The spare tire is extra. Comes standard with with 4 tie loops (2 on each side). Ramp=27 5/8" wide x 47 1/2" long.
On 06/11/2008 MORRIS KEELING wrote:
WHAT IS THE PRICE FOR A SIDE KIT FOR A 486 AND WHERE IS THE CLOSEST DEALER TO 56301 THAT WOULD HAVE IT IN STOCK? THANKS -- $275- Mies in Watkins or Bristows in ST. Cloud If they don't have one in stock we can get them one fairly quick.
On 06/11/2008 Jim Palmer from New Caney, Texas wrote:
I just purchased one of your MCT motorcycle trailer. It comes with a 5 pin female plug. I have looked everywhere for the matching male wiring harness..Can't find! Can you help? Thanks! -- I'll have our customer service department email you for help.
On 06/10/2008 Bill Ross from St Charles MO 63301 wrote:
What is the total width of the 638lw ? Also the weight of the 1997 version. 2008 is 345# Looking to buy a used one to haul behind my 4 banger. Maybe I should consider the 486. What's it's width ? THANKS -- Overall width=84 1/2" weight should be around 345# 486-overall width=64"
On 06/09/2008 Jim from Clw Fl wrote:
Could you elaborate on the ramp issue of loading dressers on the MC10 as posted on 4/27/08 -- I didn't know if the ramp needed to be wider or longer. I was waiting on a response on the specifications the ramp needed to be to make it work. We can, most likely, build the ramp to the specs, it's a matter of making it fit under the trailer. If you... [Click here for complete comment.]
On 06/08/2008 steve from stewartville/mn wrote:
I purchased your GTT garden trailer. Do yopu have sides stakes for that. I purchased it for a nonprofit camp. How much are the sides? Thanks -- We do have sides for the GTT-MSRP-$110
On 06/08/2008 lennie shepherd from atwater,ohio wrote:
hi i need a center cap for a 12in wheel ''aluma'' how can i get one thanks -- Contact any Aluma dealer-or give us a call at 515-885-2398 and we'll get you one.
On 06/08/2008 Kris wrote:
Hi i was wondering how much the 6310lw runs -- MSRP-$1824
On 06/08/2008 Frank Ruggier from Texarkana, TX wrote:
On the MC 210, can the ramp be made the full width of the bed? Also do you have any pictures showing how the ramp stores after the motorcycles are loaded? -- The ramp stores underneath the trailer and is 45" wide x 45 1/2" long. We can make it wider but the length is limited by the axle.
On 06/08/2008 Randy Armstrong from Rutledge Mo wrote:
Looking at your mctxl just wondering what 08 prices are -- $2201
On 06/06/2008 Gerry Peck from Winter Haven Fl. wrote:
I have your old catalog. Tryed on line Fri. night for dealer's.NO good!! Need MSRP for MC 210? Local Dealer needed for contact..Thank's Gerry......... -- MSRP-$3125 Check out the "dealer" section for dealers close to you.
On 06/06/2008 John A. Hufnagel from Berkeley Heights, NJ wrote:
Can you comment on when your car hauler products will appear on the web site? Thanks! -- We are in the process of changing our website. In a couple months we should have everything updated including our new enclosed car haulers. Sorry for the delay.
On 06/06/2008 Monte Valentin from Mechanicsville, MD wrote:
I am looking for the wiring diagram for a MCT trailer. -- Let me know your e-mail address or a fax#.
On 06/06/2008 Tom Hahn from Caledonia Wi wrote:
I have a model a8816 with 4 ramps.How much weight will each ramp support? I want to haul a 1500lb. tractor. -- The pair should be able to support the tractor.
On 06/04/2008 Larry McClain from Marble, MN wrote:
I have a new mct trailer with a bent fender and I would like to know how much a new fender would be and a spare tire. Thank You -- $56 for the fender and $189 for the spare tire and wheel.
On 06/04/2008 T. A. from Lima, OH wrote:
To: Anyone who reads this! This company has excellent customer service. I found Aluma to be responsive and customer focused. It is comforting to know that the quality of your customer care matches the quality of your product. (Pat, you ROCK!... [Click here for complete comment.]
On 06/03/2008 Shawn Jones from Radford, Va wrote:
Manufacturer's name of the 5 star aluminum wheels? I am not real close to a dealer and would like to find one on line for a spare. BTW, my 7210 is a great trailer. -- Carlisle- Thanks for buying Aluma!
On 06/02/2008 James Mink from Cresco, Pa. wrote:
I bought a 7800 series trailer several years ago. At the time I did not think I needed the folding tail gate/ramp. Is it possible to convert to a folding one now? -- Yes-the bi-fold gate will convert.
On 06/01/2008 Mark Harman from Kitchener,Ontaio / Canada wrote:
MC1F Motorcycle Trailer What exactly is available with this trailer? Some pics show a bare trailer and others have a stone guard and wheel chock. Mark -- Both the stone gaurd and the wheel chock are standard.
On 05/31/2008 James Stewart from Springfield, La. wrote:
Are the bed mount or tongue mount spare tire carriers for the MC-10 motorcycle trailer normal dealer stock items? -- Most dealers won't stock these. They can order them from us and usually get them within a couple of days.
On 05/31/2008 James Stewart from Springfield, La. wrote:
I just purchased a Model MC-10 motorcycle trailer. Is a side mount spare tire carrier available for this trailer? -- Not on this trailer-either a bed mount or a tongue mount. Thanks for purchasing Aluma!
On 05/30/2008 Jerry Chiusano Jr. from virginia beach, va wrote:
I understand that you are going to offer some enclosed motorcycle trailers. Can you send me the spec sheet. I am looking for a model less than 82" to go into a seven foot garage opening. Thanks, Jerry -- We do offer all our 5, 6,and 7 wide trailers with the motorcycle package option. We can build the height to your specifications.
On 05/30/2008 William Dils from Point Marion, Pa. 15474 wrote:
Who manufactures your torsion axles? Thanks -- Dexter
On 05/30/2008 Jon Dorman from Exline, IA wrote:
I would like a brochure on your enclosed car hauler trailers. Could you send one? -- We just came out with the enclosed car haulers this year. Currently, we don't have them in our brochures. We can send some spec's on them if you would like.
On 05/29/2008 Michael Talkington from Olathe, Kansas wrote:
I need a set of (2) fenders for a 548 LW trailer and the necessary brackets to replace them on a 548 SW to up size to 13'' tires. How much will the fenders cost me? -- $56 each
On 05/28/2008 Karen Kramer from Grand Forks, ND wrote:
I have a 2008 MCT and need a tail light, oval, and trim piece. How much would it cost? -- $37
On 05/26/2008 brian brenner from belleriver ontario canada wrote:
i am looking for the closest dealer to windsor ont. can. or the detroit area. could you help me with this. i would like to know what the price is for a single motorcycle trailer would be. please contact me asap. thank you. -- MC10-MSRP-$2006 Look at the "dealer" section of the website for the closest dealer.
On 05/26/2008 AGE from Madison, WI wrote:
I have a 548LW with a side rail kit. It's a long story but it took me a year to get the front rail for this (I made a wonderful front rail out of cedar and has worked perfectly for two years). Well, I was finally given the front rail and two 102... [Click here for complete comment.]
On 05/24/2008 Woody from Orlando, FL wrote:
MC210.. Seems like for a 2 bike trailer you should have a full width ramp. How much would a full width ramp be for this trailer? Thanks, -- The ramp is included with this trailer. It stores underneath the trailer and is 45" wide x 45 1/2" long.
On 05/23/2008 Dave from Muskego Wi wrote:
CAN YOU GIVE ME A PRICE for the 548lw withe the sides? also what is the weight max for the back ramp? need to know if it can be used for a ATV, thanks -- $1513 $320 side rack set 1500# evenly distributed weight for the ramp the trailer will work for an ATV
On 05/22/2008 John Pattie from Denver CO wrote:
I have an Aluma Trailer and would like to put more of that black material on the fenders. Where can I get that stuff? Thanks, John -- Give us a call at 515-885-2398 and we'll send some your way.
On 05/21/2008 Thomas H Benjamin from Barto Pa wrote:
I need the wiring diagram for the 5 pin trailer connector for a 2006 MCT Trailer. Please email it to me ASAP. I need to wire up the bike Friday to pick up the trailer. -- Will do
On 05/21/2008 Tom Henry from Jacksonville, IL wrote:
What is the price of the 7818R trailer? I am wanting at least 18ft. long and prefer 20ft.with tailgate. Will be using it to haul lawn and garden equipment, but also would want to put a 45 horse compact tractor with accessories with approx. weight 6000-... [Click here for complete comment.]
On 05/21/2008 Josh O. from Waite Park, MN wrote:
How much would the upgrade be to 14"tires? Also would that come with aluminum wheels? If not how much to go to a 14" tire with the aluminum wheels? Thanks for your prompt responses, I look forward to placing another order in the hopefully near f... [Click here for complete comment.]
On 05/21/2008 Josh O. from Waite Park, MN wrote:
I am looking into the A8816 ATV Trailer and was curious as to the base price and what upgrades are available, especially on the wheel sizes? What are the standard features(# of tie downs etc,) Thanks for your info. -- $3687-comes standard with 13" tires. Can be upgraded to 14" tires. Comes standard with 4 ramps (12"x70" and 10 tie down loops.
On 05/20/2008 Jim from Binghamton, NY wrote:
I've got what I believe is the 7818 car hauler. Awsome trailer, but I would like to get a matching spare tire and mount for the spare. Do I need to go through a dealer? My wife bought me the trailer for my 50th birthday last year and went way down to H... [Click here for complete comment.]
On 05/20/2008 Steve Estes from Sarasota Floida wrote:
I have a small pool service company. I would be interested in a utility trailer 4 x 8. Are these available? -- Our smallest 8' is our model# 548 LW which is 54" wide x 8' long.
On 05/20/2008 Steve from Salina KS wrote:
What is your price on the A8812 ATV Trailer? -- $3099
On 05/20/2008 J Tregre from Hereford, AZ wrote:
Before I commit to a 3-hour drive, I really want to know the center-to-center distance of the motorcycle wheel chocks. Someone said the GoldWing 'spread is 43", meaning a minimum of 44", preferably 48", between the chocks is necessary. -- The MC210 trailer width is 77". We don't mount the wheel chocks on the trailer. You can mount the chocks on the trailer that allows the bikes to fit the best even allowing some staggering if you want. You have to be careful that you don't mount the cho... [Click here for complete comment.]
On 05/19/2008 J Tregre from Hereford, AZ wrote:
I just called the Cholla Metal Crafts in Tucson, AZ; he said he is not an Aluma dealer anymore. Will you please tell me the nearest dealer to Tucson, AZ? 85710 -- Imperial in Mesa-#480-833-3090 Champs in Glendale-#623-937-5575
On 05/19/2008 J Tregre from Sierra Vista, AZ wrote:
Q: For the MC210 trailor, What is the distance between centers of the Motorcycle wheel wells or chock wells or whatever you call them? -- We don't mount the chocks on the trailer. We allow the customer to determine the location based on the size of the bikes.
On 05/18/2008 Debra Alala from Lincoln Park, NJ wrote:
what would price of MC210 be? and what would locations be for pick up in NJ, PA, or NY. Thanking you ahead for help with this, have to buy a trailer within the next 10 days. -- $3125-look under the "dealer" section of the website to find some Aluma dealers.
On 05/18/2008 Travis from Waterloo IA wrote:
What kind of aluminum are your 548 trailers made out of? -- Extruded aluminum planking roughly .080 thick.
On 05/18/2008 T. A. from Lima, OH wrote:
WHERE IS THE CLOSEST A8812 ON THE GROUND FROM DAYTON, OH? -- Check with Hayward Distributing in Columbus OH. Phone # 614-272-5953.
On 05/17/2008 John Goetz from Grand Forks/ ND wrote:
Could you please send me a price on the 7210 with a bi fold en gate. Also I'm looking for a price on side rails. -- $2017 for 7210 model $122 for bi-fold gate $417 for sides
On 05/16/2008 Scott Rhodes from Patterson , La. wrote:
Could you please give me a price on the TK1 mdl. trailer please , w/spare tire and spare holder , thanks . Scott -- $2757 $300 for tire and mounting bracket
On 05/16/2008 terry mcbain from hazen wrote:
what size coupler is on the 6310 -- 2"
On 05/16/2008 David Wielander from San Diego wrote:
Price on trailer 6810 and 6310lw or6310h FSBVQDK -- $1824-6310 $2236-6310H $2155-6810
On 05/15/2008 dave from wilmington Delaware wrote:
mc1F what is the price of this trailer ? also Mc2 F mc10 Thanks for your help these trailers look good . I just came back from myrtle beach bike week 600 miles each way in the rain towing a borrowed enclosed trailer dropped my gas milage down to... [Click here for complete comment.]
On 05/15/2008 John Hillwick from Omaha, Nebraska wrote:
On your 8200 series trailer, is there an aluminum rock guard available for the front of the trailer? -- Yes-MSRP-$394
On 05/14/2008 braidy christianson from sauk rapids mn wrote:
I have the #6314 with the peeling fender sheets. My address is Braidy Christianson 1285 15th street ne #213 Sauk Rapids MN 56379 Best trailer I've ever had, always gets compliments. Thanks! -- Thanks for buying Aluma! We'll send you out some sheets right away.
On 05/14/2008 Dave Huizenga from Fulton, IL wrote:
I recently purchased a ATV Trailer A315 from Hawkeye Motorworks in the Quad Cities. The ramps rattle while going down the road TERRIBLE! When I looked at the A2123 they told me the ramps were held down the same way---NOT!!! The trailer didn't come with... [Click here for complete comment.]
On 05/13/2008 braidy christianson from sauk rapids mn wrote:
Last year I purchased a #6314 trailer from Visto's trailer sales in West Fargo, ND. The black rock chip sheets applied to the fenders are peeling off. Is it possible to get new ones? My trailer doesn't ever sit outside. Thanks Braidy -- Let us know where to send it to and we'll send some new ones out to you.
On 05/13/2008 Brad from AB wrote:
What is the width between the fenders on the 8220? -- 82"
On 05/13/2008 Alan Howerter from Washington, IL. wrote:
What do you recomend for cleaning and protecting your alum. trailers. -- Product called Sabre. Telephone # is 800-392-8816.
On 05/13/2008 Alan Howerter from Washington IL. wrote:
I just purchased a 6310LW trailer. I have never had a torsion axle on a trailer before. What if any service is required for the axle. -- There should have been an axle manual that came with the trailer. If not, we use dexter axles and the information can be found on their website(www.dexteraxle.com). Thanks for buying Aluma! We hope you enjoy the trailer.
On 05/12/2008 Shane from Helena, MT wrote:
Looking for a cargo trailer for my business -- We have many sizes for you to choose from. You won't be disappointed if you buy Aluma.
On 05/12/2008 Ray from Aitkin, MN wrote:
We have lost the front cargo panel or the front end panel of a trailer 6310SW We need to replace it. do you know where to get one and how much? -- Should be able to get it through any Aluma dealer. See "dealer" to locate a dealer closest to you.
On 05/12/2008 GAVIN AND JENNIFER RANS from Saskatoon, SK, Canada wrote:
I bought an 8612 snow trailer. I just purchased a Yamaha Rhino, but I'm worried about whether the ramp will take the weight (1050 lbs). -- It should handle the weight.
On 05/12/2008 ALan Kiser from Moberly, Mo. 65270 wrote:
Hi , I just purchased a TK1 and am wondering if you make a wheel chock for the front wheel of my Road King that I can bolt to the floor. Thanks AL -- We do make a 3' motorcycle bracket that bolts to the floor that comes standard with that trailer. Let the dealer know that bracket should come with the trailer and they will get you taken care of.
On 05/12/2008 doug fusselman from Omaha, NE wrote:
What is the MSRP for the MC2F? -- $3634
On 05/11/2008 Mimi g from San Benito, Tx 7858 wrote:
Can you send me a price list of all the trailers. -- I can't give you all that information. If you have some models your interested in, let us know and we can get you some MSRP's.
On 05/11/2008 justin from oxnard ca. wrote:
NEED A 18 TO 20 FT ENCLOSED TRAILER. WAS WONDERING IF YOU COULD SEND ME A BROCHURE AND PRICES PLEASE THANKS -- Sure-let me know the address to send to.
On 05/11/2008 Ken Pless from Ellensburg, WA wrote:
Is it possible to purchase just a bi-fold ramp? If so, what would the price be? Thanks........................Ken. -- It is-the price depends on the width of the trailer-$282-$600
On 05/11/2008 craig hebert from harvey, louisiana wrote:
what is the price for the model 6314 with the solid side racks and tie downs. -- $2384 $675 for solid side rack set $37 each for recessed tie downs
On 05/10/2008 chris from cushing, wi wrote:
I picked up my AE46 trailer this afternoon. It was ordered a few months ago - It does not have the aluminum star wheels as the posted info showed when I ordered the trailer. Rather, it has aluminum wheels with "round" holes. I would rather ha... [Click here for complete comment.]
On 05/10/2008 JERRY PETERSON from FOREST CITY IOWA wrote:
I BOUGHT A MXTXL AND I NEED TO CHANGE THE PLUG ON THE TRAILER. COULD YOU SEND ME A WIREING DIAGRAM FOR THE LIGHTS. THANK YOU JERRY -- Will do.
On 05/09/2008 Ed from Allenton, MI wrote:
I have a MC1F motor cycle trailer. Performs fine except the ramp rattles tremendously during travel. Any suggested fixes? -- Good morning from Bancroft, Iowa. Thank you for purchasing our MC1F motorcycle trailer. This model has been a great trailer for us and the customers who purchased it. Aluminum is a wonderful material but one drawback is the lightweight of the ram... [Click here for complete comment.]
On 05/09/2008 Randy Southworth from Appleton WI 54915 wrote:
I am trying to deside between the 7712H & the 7812 models can you tell me how much these trailers are. I would also like to know if these trailers can accept the sides, bifold tailgate, dove tail & upgraded rims-tires with pricing. Can i buy dire... [Click here for complete comment.]
On 05/08/2008 Billie Gene Marshall from hannibal MO. wrote:
price of 486 ? and with swivel tongue jack ? -- $1143-tongue jack-$74
On 05/08/2008 Chris from ND wrote:
Hi, how big of a hole do you cut for the 2000lb flush mount tie downs? Also where can I see pictures of the side kit and salt shield for a 7814st. One more thing, can you put a side kit on while utilizing the salt shield? How much would a sald shield with... [Click here for complete comment.]
On 05/08/2008 someone wrote:
Do you have a brochure on the Aluma trailer 7210H that you can mail to me? GRANT 326 HOLLAND ST SYRACUSE NY 13204 -- Will do.
On 05/07/2008 Fred Wolpert from Patchogue. NY wrote:
I am having trouble locating a dealer within 200 miles of my home to get to see an AE46, get a price list with options, colors etc.Is it that hard to buy a small aluminum trailer in this part of the country. I would like to use it with my camper van. Can... [Click here for complete comment.]
On 05/07/2008 someone wrote:
I LOOKING FOR AN ALUM OPEN TRAILER MODEL 8113 6'X12'I've been asking about the 64133 I world like to know the price? Also, do you have Photos sent to me T. -- $3728 for the 8113-picture of the trailer in the "news" section of our website. $2866 for the 64133 trailer(7712H)Picture found in "products" then "flatbed trailer" section of the web(7712H)
On 05/07/2008 Joe S from S.E. Iowa wrote:
Hi am wanting to purchase a AE714TAV trailer and want to haul 3 sleds in it. Can you give me a drawing that shows this layout on the inside. I have pro-e, autocad, pdf, etc.. Joe -- Please provide a e-mail to send to.
On 05/06/2008 Vern Strachota from Reeds Spring, Mo wrote:
What is the price of a 6x10 flopgate trailer? Also do you have the stickers availabel that are on the sides of the trailers that say Aluma? -- $5512-we do have stickers available-let us know where to send them to.
On 05/06/2008 Joe C. from woodville, wi wrote:
Recently bought a 8113 utility trailer. What are the avalible accessories/ Upgrades for this trailer? Thanks -- Thanks for buying Aluma! Let us know what you think of the trailer once you use it. Some options we have for the 8113: Tie Loops Recessed tie downs tongue handle spare tire rear stabilizer legs electric brake upgrade
On 05/05/2008 Jeff Stoumbaugh from Chehalis, Washington wrote:
Hello, I received my MCT Trailer last Wed and I am very Happy with the purchase a great little trailer got my hitch on the weekend before and spent my Friday night wireing my bike and put on the plates, then a little cleaning from the shipping, and took i... [Click here for complete comment.]
On 05/05/2008 michael mohrbacher from crestview, fl wrote:
SEEN YOUR TRAILERS AT THE THUNDER BEACH RALLY. WHAT ARE THE PRICES ON THE ALUMA TRAILER TO PULL BEHIND A MOTORCYCLE? I HAVE A 2007 GL1800 TRIKE. -- $1891-MCT $2201-MCTXL
On 05/05/2008 Mike Anderson from Lebanon, IN wrote:
Can I special order a 2123 with a 2200# axle? How much would it reduce the price? -- Yes-it would be the same price.
On 05/05/2008 John from Carroll, Iowa wrote:
I have a AE714TAR with 12" extra height. Can you tell me how much weight the ramp door will hold? And when loading a vehicle is that so much per axle? Thanks John -- It should be able to hold between 4000-5000#'s. The weight should be evenly distributed for the ramp to handle the weight.
On 05/05/2008 Mike Anderson from Lebanon, IN wrote:
7710 What is the actual inside width of the bed, between the rails? Also, what is the lsit price for this model (not the H)? -- 77" inches-$2385
On 05/05/2008 Ghost McCabe wrote:
I am looking for what wiring system and hitch to use for an MCTXL. Do they come with a flat or round plug? Is the ball 2"? I plan to buy the trailer soon and am just looking ahead at all I will need. Thanks, GHost -- We'll send you a wiring diagram. They come with a 5 round harness and a 1 7/8" coupler.
On 05/05/2008 Dan Renner from Saginaw MI wrote:
How much are your trailers, specifically the 7710 or the 7712H -- $2385-7710 $2866-7712H
On 05/03/2008 Steve Fleming from Parry Sound wrote:
Hi, just wondering if you made the MCTXL with a pivot hitch?? -- We don't at this time.
On 05/03/2008 James Calvo SR. from New Britain CT. wrote:
I world like to know the price of a M/C trailer # MC10 and MC210 I am going to tow this with a 2001 Caddy what is the weight of the trailers Jim -- $2006 MC10-390# $3125-MC210-540#
On 05/02/2008 Jim Baca from Brighton, Colorado wrote:
Do you make the MCT in a flat bed trailer with sides so I can haul things around that won't fit in the box? -- We make a MCTXL that is 12" longer and an AE46 which is 4'x6' enclosed. We handle other flatbed style open trailers that are bigger.
On 05/02/2008 Matt Roth from Napoleon ND wrote:
Just got my 6316 trailer in I am very impressed with it i like the bifold engate and how light weight the trailer is. It will be used to haul 2 golf carts and my 4 wheelers. Keep up the good work. -- Thanks for buying Aluma!
On 05/01/2008 Wayne Twining from Peru, NY12972 wrote:
LOOKING FOR AN ALUM TRAILER MODEL # 548lw. mY SON IN LAW BOUGHT ONE FROM YOU. -- Best bet is to go to our "dealer" section of our website to find the closest dealer. The 548 LW is one of our most popular models.
On 05/01/2008 Steve Johnson from Belpre, Ohio wrote:
Hi, I am looking at the MCT/MCTXL trailers and was wondering if you have had any feedback about the weight of the XL. I would be pulling with an 03 Goldwing. I like the trailers better the the lighter weight fiberglass trailers but they are a little hea... [Click here for complete comment.]
On 05/01/2008 James McCracken from Keyser wv wrote:
I wrote a comment awhile ago about my new trailer. And forgot to give you my mailing address. Rt 5 Bx 338 Keyser Wv 26726 -- I can't find the old e-mail-sorry. What did you need sent to you?
On 05/01/2008 James from Keyser Wv wrote:
I recently purchased one of your 8218 flatbed trailers. And just wanted to let you know i love it. Years ago i designed trailers for my Dad to build. Of course all trailers were heavy and made of steel. Keep up the good work they pull like a drea... [Click here for complete comment.]
On 04/30/2008 Lee from Green Bay WI wrote:
What is the cost for the 6310H with bi fold gate and side racks? -- $2236 $122 + bifold gate $395 + side rack set
On 04/29/2008 Jack Brauer from Oshkosh, WI 54901 wrote:
I want to buy your model 641 or A8812 trailer. My 2305 John Deere with a bucket requires that I need a 12 foot trailer. My tractor with bucket weighs almost 1900 lbs. Would I be able to drive up the loading ramp without doing any damage to it? I plan... [Click here for complete comment.]
On 04/29/2008 tjpratt from beardstown il wrote:
i would like the price on a ae714ta -- $8505
On 04/29/2008 DARYL PROPP from WEST ALLIS WI wrote:
WHERE DO YOU MOUNT THE SPARE TIRE IS THERE A KIT -- It depends on the model#. For our utilities it is on the tongue or side rail-for our atv and motorcycle trailers it is on the tongue or the bed. We do have kits.
On 04/29/2008 ray nelson from coudersport,pa wrote:
SORRY TO BOTHER YOU AGAIN BUT MY SPAM BLOCKER MUST HAVE BLOCKED YOUR EMAIL. I AM THE ONE BUYING THE MCT THAT NEEDED THE WIRING DIAGRAM. NOW YOU ARE IN MY ADDRESS BOOK, IT SHOULD COME THROUGH. THANKS, RAY PREVIOUS EMAIL WAS 04/28/08. -- Okay
On 04/29/2008 randy from rehoboth, ma. wrote:
I am interested in the 8113 model. could you tell me if it comes with a tounge jack, also a spare tire and wheel. If not what would the cost be to purchase. Do you have a parts list for any acessories for this trailer. Thank you -- It comes with a swivel jack. Spare tire = $225. We do have some other accessories for this trailer. Tie Loops-$10 Recessed tie downs-$37 Tongue handle-$11 Electric brake upgrade-$274
On 04/29/2008 Dave Perry from Berthoud/Colorado wrote:
I am interested in a folding, two bike trailer, which I believe is the MC2F? What is the list price? Does it come with the front stone guard and is the ramp either moveable or wide enough to load two bikes? -- $3634 comes standard with the front rockgaurd the ramp is 27 5/8" x 47 1/2" long.
On 04/29/2008 Mike from Lebanon, IN wrote:
A888 - Can I fit tire size ST145/R12 onto this trailer as a replacement of the stock tires? -- I believe they will work.
On 04/29/2008 Dennis Shields from Maybrook,NY 12543 wrote:
I wrote to you yesterday asking about a side rail kit for a 4.5x8 trailer, I have been to 2 dealers neither have these in stock or plan to any time soon. I am in Orange county NY. Thank You -- Call Al Bennett at Bennett Trailers in Scotia NY. He may have one in stock-if not he has an order in house that he can add to. His phone# 518-887-3333.
On 04/29/2008 Mike Anderson from Lebanon, IN wrote:
A888 - Is it possible to upgrade the tires? If so, what is available? Would a larger diameter tire/wheel fit? -- Comes standard with 10" tires. You can upgrade to 13" tires.
On 04/28/2008 Jerry from St Louis, MO wrote:
Would like a price for your model #8214. Also, do you have a front stone/salt shield available for that model, and if yes, the price -- $5521 Yes-$394
On 04/28/2008 Bill Jackson from Gun Barrel City, Tx wrote:
I have a new TK1 Trike trailer and love it. My only problem is loading it. I need a longer ramp to load and haul it more lever. Do you make a longer ramp for the TK1 or anything I can use. Thanks -- We can make a longer ramp but it won't fit under the trailer. Sometimes having a drop hitch helps the leveling. Thanks for buying Aluma!
On 04/28/2008 ray nelson from coudersport,pa wrote:
I AM IN THE PROCESS OF PURCHASING THE MCT MOTORCYCLE TRAILER. I HAVE THE 5 POINT PLUG BUT NOT A CLUE ON THE THE WIRING DIAGRAM. WOULD YOU PLEASE SEND ME A COPY. ANY HINTS YOU CAN GIVE ME OM WIRING IT TO MY ELECTI GLIDE WOULD BE APPRECIATED. THANKS, RAY -- Thanks for the upcoming purchase of the MCT. Let us know what you think once you use it. We'll send you some wiring information via email.
On 04/28/2008 Dennis Shields from maybrook,NY wrote:
I am looking for side rail kit for a 4.5x8 ,dealers tell me they dont stock these. Is there away to have them shipped -- We can ship these. These rails are a pretty popular option. Where are you located? Maybe we can help find a dealer who has 1 in stock.
On 04/28/2008 C A Mullins from Blountville, TN wrote:
I have been trying to find information about a model 1016 flatbed trailer. It is similar to the 1020 model, but 4 feet shorter. Has it been discontinued? If so, why? How much should it cost? What is MSRP? -- We don't have any published information on the 1016 but we have made a few 1016's last year. We can make them on request. MSRP-$5800.
On 04/27/2008 les white from dry branch ga 478 945 6779 wrote:
excellent trailer(mc10) unfortunately the ramp is not adequate for loading a harley davidson dresser,do you have an upgrade. regards -- We don't at this time. What dimensions does the ramp need to be?
On 04/26/2008 Kim from Toronto Ontario wrote:
I am wondering how much a MCTXL trailer will cost me delivered to toronto Ontario Canada. Also how long would it take if even possible to have it shipped? -- $2201 MSRP-best bet is to get it from one of our Canadian dealers. Please visit the "dealer" section of our website.
On 04/26/2008 K. E. Naser from RED OAK, IA wrote:
Is the AE46 on your photo page the same as the MCT/MCTXL on your products page? Saw your similar trailer over a year ago being pulled by a mini-van. (typical motorcycle pullers aren't large enough). Want it small & secure as a cargo-hauler,(camp gear &... [Click here for complete comment.]
On 04/25/2008 Alex from Denver, co wrote:
how much is a new 7812 or 7814? Can you tell me if there is one available in 80015 area? -- $4768 and $4962-best bet to have those trailers are Classic Trailer or Western Slope-go to the "dealer" section of the web to find their # or web address.
On 04/25/2008 Ron Dirnbeck from Florissant Mo.63033 wrote:
I don't see an A212 on the website -- It's under products-ATV-A2123.
On 04/25/2008 Steve Pierce from Wheat Ridge, CO wrote:
I just checked the specs on your A888 model and noticed that you have the old "A848" specs listed. The bed size should be 88" on 84" as listed in the spec sheets. You might want to change this ASAP. Thanks Steve -- Thanks! We'll get that changed.
On 04/24/2008 Ron Dirnbeck from Florissant Mo.63033 wrote:
I emailed the other day to ask if the front corners on the 7710h could be made square instead of on the angles that they are. I want to get 2 full size atv's on there putting the one in the front on from the side and the second one straight on from th... [Click here for complete comment.]
On 04/24/2008 TKS from wisconsin wrote:
I was given a qoute on a 64103 77.5 x 122.5 whats the msrp. I haven't seen it, is flat or dove tailed?? -- $2642 flat dovetail add $243
On 04/24/2008 Doug Barker from Layton, UT wrote:
I am having trouble finding exactly the right model in your brochure or here on the web. I want flat bed (no wheel wells sticking up). I need 99 inches of width and 199 inches of length. I want it to have V shaped front end like your motorcycle trailers... [Click here for complete comment.]
On 04/24/2008 Ron Durrance from Cordova , TN wrote:
What are the dimensions of the MC-1F when it is in the folded storage position ? Thanks Ron -- 95" upright.
On 04/23/2008 EVERETT COPELL from KENNEWICK,WA. wrote:
I JUST RECENTLY VEIWED A COUPLE OF YOUR TRAILERS AND WAS PLEASED AT THEIR DESIGHN. HOWEVER, I WAS WONDERING IF A PERSON COULD PURCHASE ONLY THE FOLD UP RAMPS I SAW ON ONE OF YOUR UTILITY TRAILERS. THANK YOU -- Yes-you'll have to buy them through one of our dealers.
On 04/22/2008 Ron Dirnbeck from Florissant Mo.63033 wrote:
CAN THE 7710H BE MADE WITH SQUARE FRONT CORNERS INSTEAD OF THE ANGLES THAT ARE ON THERE. IF SO WHAT WOULD THE PRICE BE THANKS RON -- I don't think we ever been asked to do that. What is your reason? It probably would add $100-150.
On 04/22/2008 Jeff Stoumbaugh from Chehalis/WA wrote:
Yesterday I purchased one of your MCT Trailers and it is going to be shipped to my place, I would like to have my bike wiring done before it arrives except for the plugin that I also ordered can you email me the wireing diagram. Thank you Jeff -- Will do. Thanks for buying Aluma! Let us know how the trailer works and if you have any suggestions on the trailer. If you take any photos of your bike and the trailer, we would love to have them for our website. Thanks again!
On 04/22/2008 Ron Dirnbeck from Florissant Mo.63033 wrote:
What is the msrp on a 7712H Thanks Ron -- $2866
On 04/21/2008 Ron Dirnbeck from Florissant Mo.63033 wrote:
I have been trying to find out some information on your new trailer model 8113 There are two dealers around here and neither one has on or knows anything about it.I was wanting to know if I can buy direct from you and if so what is the retail on this... [Click here for complete comment.]
On 04/21/2008 Mark Dugal from Opelousas,louisiana wrote:
Hello,I am having a hitch built in anticipation of buying an MCT. The 3rd closet dealer has one in stock. It has a 5 pin round electrical hookup. I would need the socket type and the pin wiring so I can have the bike ready for hookup and pulling... [Click here for complete comment.]
On 04/21/2008 Doug Treble from Regina, Sask. wrote:
Is there any problems with storing my snowmobiles over the summer on a 8614 snowmobile trailer? Would all that weight effect the torx axles over time? Thanks, Doug -- No-The axle and the trailer will be fine with the weight over time. Thanks for buying Aluma!
On 04/21/2008 Jack Benner from Harrisburg, Pa. wrote:
The MC10, when hooked to my SSR has a 1.5" drop for each 4 feet of trailer. I would like to substitute 15" wheels and tires for the 13" that are on from the factory. Is that possible and a solution to my problem. -- You could put on 15" tires but you would have to remove the fender and raise it up for the tire clearance. Needs to have 3.25" of clearance from the top of the tire to the fender. It appears you don't have a drop hitch on your SSR. Are you hooking t... [Click here for complete comment.]
On 04/21/2008 Rene from St.Pierre,Jolys. Manitoba. wrote:
2Q:Do all motorcycle trailer have V-nose?And I would like a price on a AE612TA with V-nose & ramp and AE612 single axle,V-nose & ramp.Tanks a bunch! -- Yes- AE612-$6049 AE612TA-$7298
On 04/21/2008 J Basile from Bullhead City, AZ wrote:
A couple more questions. What is the thickness of the floor on the MC-10. Trailer has stone guard so is there a spare tire option. Thank you. J -- We use extruded aluminum plank for our floor on the MC10. This extruded plank is 9.5" wide with 3 legs giving a depth or "thickness" of 1.50". The material thickness of the floor is approximately .080". This does not include the surface ribs. We have... [Click here for complete comment.]
On 04/21/2008 Scott Grant from Simonton.TX 77476 wrote:
I would like prices on these two trailers. AE46 and 2 MCTS -- $2510-AE46 $1891 MCT
On 04/20/2008 David Gough from Darlington, Wi. wrote:
Saw two of your MCT trailers today at Scot Implement. Can you give me the approximate price range, probably for the MCTXL and are there options, such as a spare tire w/wheel? I also noticed some water inside one of the trailers. Are they suppose to be... [Click here for complete comment.]
On 04/20/2008 Dave Ashley from Fairfax, Va. wrote:
looking for a 7712h trailer. I want one that is at least 6x12 with 3500 lb single axle. What do they sell for? Do you also have sides and if so how much? Looks like a good product, look forward to hearing from you. -- $2866 MSRP We do have sides-$530 The trailer has a 3000# axle This trailer is one of our most popular models.
On 04/20/2008 Robert Parker from porsmouth, NH wrote:
I would like to change the wooden sides to aluminum. The rails that you use on your Model 6810 look very good.Would requier, 8 at 119' each and 4 at 66" each. Would i be able be buy this material. Thank You -- We could sell you the sides but through an Aluma dealer.
On 04/20/2008 Sonya Royce from Swanton, VT wrote:
Could you quote me the price for the single axle enclosed motorcycle trailer (6' x 12') Thank You -- $6248
On 04/19/2008 Joe from Tucson, AZ wrote:
What is the MSRP of the 2-place A888 side load ATV trailer? Does that include shipping to the dealer in Tucson, AZ. -- $1577 shipping may be a little more
On 04/19/2008 Don Rasmussen from Long Prairie, MN wrote:
I have had trouble finding a cooler that fits the platform on the tongue of the MCT. Was it designed with any style or brand in mind? I noted that the 3 pictures on your site all had coolers that were similar. Would like to know the brand if possible.... [Click here for complete comment.]
On 04/19/2008 Larry Newell from Glenrock, Wyoming wrote:
I have a motor cycle trailer model MCT. Can I get a copy of the wiring diagram for the trailer? -- I'll have our customer service dept. e-mail you the information. Thanks for buying an Aluma!
On 04/17/2008 tom jones from salinas ca. wrote:
hitch,tongue,frame,axle,springs, wheels and tires.(trailer with nothing on top) no wires and lights,box,box lid,out side frame. -- $800
On 04/17/2008 tade from deocrah,ia wrote:
I was interested in you model 1020 trailer. Do you make it with larger axle capacity such as #5000 each. -- 4800# is the largest we'll go.
On 04/16/2008 Gary from Wichita Falls, TX wrote:
On the A888, what size is the wheel bolt pattern,etc 4.0,4.5,? THANKS -- 5-4.5BHP
On 04/15/2008 Jeffery a. Erwin from Dansville New York wrote:
What is the rear door opening size on a AE714TA. What would it be with 6 inches of extra height and what would it be with 12 inches of extra height? Please don't have a dealer call me, I would just like the measurements foe now. Thanks you, Je... [Click here for complete comment.]
On 04/15/2008 tom jones from salinas ca. wrote:
Can I get an MCT trailer frame and axle with out the box, and at what price. Local dealer would not order or quote a price. Would proble have to order direct, if thats posible. -- Without the lid and outside frame?Tires?
On 04/15/2008 J Basile from Bullhead City, AZ wrote:
Bought a 2006 MC 10 trailer. Sweet! Any spare tire options available? J -- We do have a mount that will work on the tongue of the trailer.
On 04/14/2008 Todd R. MacDonald from Greene, New York wrote:
I just purchased your MCT trailer and would like you to E-mail the wiring schematic to me please. Also the dealer I bought the trailer at doesn't wire motorcycles I have owned many different trailers over the years but never one with the style plug that c... [Click here for complete comment.]
On 04/14/2008 lee harvey from winchester va wrote:
sorry -- how wide is the ramp on the 8614? is it the full 101" wide or a track ramp for tires only? if it is a wide ramp, can the ramp have a material such as plywood inserted/attached to make is solid? I cannot find this trailer anywhere near me other... [Click here for complete comment.]
On 04/13/2008 Rick Smith from New Canada, Maine wrote:
Can you tell me the price on the aluminum single motorcycle trailer with the shielded diamond plate front; I think a MC1? OR a MC10? Prices on both?? Thanks Rick -- MC10-$2006 MC1F-$2520-FOLDING 1 PLACE TRAILER
On 04/13/2008 lee harvey from winchester VA wrote:
what is the deck height for the 8614? how long are the rear ramps? can the ramps be placed lower than the deck height to create a stepped ramp? considering this trailer for carrying and launching a hovercraft and wonder how difficult to load from rear. -- 22"-24"-Ramp is 72" long and fits underneath the trailer. The back of the trailer has a lip to mount the ramp on. It would be hard to create a stepped ramp on this trailer.
On 04/12/2008 Jerry Dutcher from Waukee, IA wrote:
Where are your dealers in Iowa near Des mOInes, thanks and do they take tradeins Jerry -- Thomas Bus in Ankony and I believe they take trades.
On 04/12/2008 David W. Keane from Keokuk, Iowa wrote:
I would like a Aluma model mc210 trailer. Where is the closest place to pick one up to Keokuk zip code 52632 -- It looks like Mikes Trike in Quincy IL For other dealers go to the "dealer" section of our website.
On 04/12/2008 Ron Rego from North Attleboro Ma. wrote:
Hello I baought a 638lw last year and now I need a small enclosed trailer to tow behind a Hyundai Santa Fe. Even though the MCT and MCTXL are for towing behind motor cycles I thought it would be ideal for my hyundai. Could you give me a price on bot... [Click here for complete comment.]
On 04/12/2008 Kristin Guderyan from Hudson Bay,Sk. wrote:
Does the 8620 4 place snowmobile trailer have elec. brakes on both axles?Are the bearings oil bathed or grease? -- Yes it has electric brakes on both axles and they are greased.
On 04/12/2008 D. Haasch from Wi wrote:
Hi, what is heaviest load allowable in the loading ramp of the #7210h, what is msrp on the trailer & the sides w/ front accessories -- 1500# weight distribution evenly. $2477-7210H $417 front and side racks
On 04/12/2008 Loren VanSwoll from Hermiston, Or wrote:
Would Like to have a custom built trailer. Is that possible? -- We have done some custom built trailers. Let us know the details.
On 04/11/2008 Philip from Cary, IL wrote:
Do you still make the AE8620 4 place deck over snowmobile trailer or any deck over trailer with similar dimensions? -- We still make the AE8620.
On 04/11/2008 Corey from gaylord mn wrote:
I live in Gaylord Mn -- Best bet is to try the following dealers: L&P-Hutchinson-320-587-2332 River Valley-New Ulm-507-359-3180 Stoufers-Madison Lake-507-243-4080
On 04/11/2008 Corey from Gaylord,Mn wrote:
how much is a new 7814? Does it come with a tail gate? Can you tell me if there is one available in my area? -- MSRP-$4962 comes with ramps-Add'l $195 for a tailgate. Where do you live?
On 04/10/2008 Jim from Smithsburg,Md wrote:
yomI am looking for a 6314 trailer. I have had no luck finding a dealer in the area that has one or is interested in looking for one. Could you please let me know if there are any area dealers that have this model trailer in stock. I am located in Western... [Click here for complete comment.]
On 04/10/2008 Mike from Brainerd, MN wrote:
Did you make a model 720? Bed size 120"X72" Am curious how much they sold for. -- Yes-model number 7210 $2017
On 04/10/2008 Krista Bergstrom from Great Falls, MT wrote:
interested in the AE58. Is there a local dealer I can work with & what is the priceing? Thank you -- Where are you from? MSRP-$4082
On 04/10/2008 Dave Winter from Valparaiso, IN. 46385 wrote:
The specs speak of a storage area/box on the TK1, I can not see it in the photo.. can you send a brochure ? Is there a spare tire mount or is that an option ? what is the cost ? what is the cost of the spare tire ? my local dealers do not stock the TK1... [Click here for complete comment.]
On 04/09/2008 Jim from Smithsburg,Md wrote:
I am looking for a 6314 trailer. I have had no luck finding a dealer in the area that has one or is interested in looking for one. Could you please let me know if there are any area dealers that have this model trailer in stock. Thank you. -- Where are you from?
On 04/09/2008 Ferguson Trailersales from Dover, Minnesota wrote:
On your dealer locator, when u click on our dealerships name, it doesnt go to our website, cause you have the web address incorrect. It should be www.Ferguson-Trailersales. com Thanks -- We'll get it corrected.
On 04/09/2008 Mark Beacom from Omaha NE wrote:
I am looking at a used 8220, I'm wondering what the retail price for that model is when new -- $6621
On 04/08/2008 Bruce Walk from Rochester, MN wrote:
I had posted a question over the weekend about placement of the bolt-on stabilizer jacks for my 64133. Would it be possible to let me know if that request made it thr